Underbody Engine Sump Protection Bash Guard Plates Suitable For Toyota Hilux 2015-2024

• Welded reinforcing ribs and machine folded wings to create a super strong protective structure for your engine and transmission. The strongest structures are not made from the heaviest & thickest materials but from strategic reinforcements and smart engineering.
• Heavy duty 3mm thick powder coated steel - built to take tough hits and protect your precious engine from underbody obstacles and damage

Engine

• 2 piece design - interlocking plates bolted together means there are no gaps for large debris to damage any vital components starting from the radiator & ending at the engine sump (i.e. steering & engine sump)
• Smart design - retains easy access to major service parts such as:
  • Oil drain pan plug - dual access holes to minimise oil spillage onto the underbody plates. 1 half-circle hole directly under the drain plug for when the oil is slowly dripping out
  • Side access to oil filter

Engine & Transmission

• 4 piece design - interlocking plates bolted together means there are no gaps for large debris to damage any vital components starting from the radiator & ending at the transfer case (i.e. steering, engine sump & transmission)
• Huge improvement over OEM bash plates - not only are you treating your car to much thicker protective steel & engineered strength, there is an extra transmission guard that was non-existant before. This guard runs all the way to the front cross member and is bolted up by a support brace that spans the width of the cross member.
• 55mm deep & 80mm wide rear runner rails built into the transmission guard which tapers off, allowing any obstacles to slide along the underbody plates and safely deposit the obstacle behind the transmission where the clearance is higher
• Smart design - retains easy access to major service parts such as:
  • Oil drain pan plug - dual access holes to minimise oil spillage onto the underbody plates. 1 circular hole directly under the drain plug for when the oil is slowly dripping out & 1 longer rear hole to allow for the initial, faster flow of oil
  • Side access to oil filter
  • Transmission drain and fill bolts

At Iron Outback Co., we deliver high-performance equipment backed by trusted Australian service and support. We only partner with official, authorized suppliers, ensuring every product you receive is genuine, covered by warranty, and ready to perform when it matters most.

Most orders require 1–3 business days to be processed before dispatch. Processing time is separate from delivery time.

Some products are dispatched directly from our Australian suppliers or manufacturing partners. Large, bulky, custom-made or temporarily backordered products may require additional processing time.

Once dispatched, estimated delivery times are:

• Metro NSW, VIC, QLD, TAS and SA: 2–5 business days
• Regional NSW, VIC, QLD, TAS and SA: 4–6 business days
• WA and NT: 4–8 business days
• Large or bulky goods: 6–15 business days

These timeframes are estimates only. Courier delays, public holidays, severe weather and remote delivery locations may affect delivery.

Tracking information will be emailed once your order has been dispatched. If you have not received tracking within five business days, please contact support@ironoutbackco.com.au so we can investigate.

All physical items are backed by applicable manufacturer warranties.
If no explicit warranty is mentioned, your product is still covered under Australian Consumer Law

Change-of-mind returns are not accepted unless otherwise noted on the product page.

To initiate a return, contact:
support@ironoutbackco.com.au within 7 days of receiving your order.