Oricom UHF390 5 Watt 80 Channel UHF Radio With Remote Microphone 5 YR WTY 2012
Tax excluded. Shipping calculated at checkout
• 80 Narrowband channels*
• 5 watts (max TX power)
• Heavy duty controller speaker microphone
• Ultra compact transceiver
• Rotary volume & channel knob
• CTCSS and DCS
• Tri colour backlit LCD display (Amber/Red/Green)
• Duplex (range extender)
• Open/Priority and Instant Channel Scan
• Digital squelch control
• Busy channel lockout
• Rugged chassis construction with integrated heat sink
| Compliance | AS/NZS 4365:2011 |
|---|---|
| Frequency Range TX | 476.425 - 477.4125 MHz |
| Number of TX/RX Channels | 80 UHF CB |
| Channel Spacing TX/RX | 12.5KHz |
| Operating modes | Simplex, Repeater TX offset (+750kHz) |
| Selcall ID | 5 Digit with alpha display |
| Scanning Speed | 130 msec per channel |
| Antenna Impeadance | 50 Ohms |
| Operating Volts nominal | 13.8 VDC |
| Operating Volts Range | 10 to 15 VDC |
| Over Voltage Protection | Diode and voltage regulator |
| Over Current Protection | 2 Amp fuse |
| Reverse Polarity Protection | Shunt diode |
| Frequency Stability | +/- 5ppm |
| Transmitter | |
| RF Output Power | Nominal 5watts |
| Modulation | F3E (FM) |
| Maximum Deviation | 2.5kHz |
| Spurious Emissions | < -30 dBm |
| TX Audio pre-emphasis | + 6dB/octave from 300Hz to 3kHz |
| Current Consumption during TX | 1.6 Amps with 50 Ohm antenna termination |
| Reciever | |
| Circuit Type | Dual conversion superheterodyne |
| IF Frequencies | 1st IF = 21.4MHz , 2nd IF = 450kHz |
| Current Consumption during RX | 200mA |
| Sensitivity | < -123dBm at 12dB SINAD |
| Sensitivity Receive only channels | < -110dBm for 12dB SINAD |
| Selectivity | +/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB |
| Intermodulation Immunity | > 70dB |
| Spurious Immunity | > 70dB |
| Audio Output Power | 3 Watts Maximum |
| RX Audio de-emphasis | -6dB/octave 300Hz to 3kHz |
| Audio frequency response | 300Hz to 3kHz |
| External speaker jacks | One on transceiver one on head unit for optional 8 Ohm mono speaker (3.5mm jack.) |
| Transciever | |
| Dimensions | 135 (d) x 110 (w) x 29 (h) mm |
| Weight | 420g |
Why buy from us
At Iron Outback Co., we deliver high-performance equipment backed by trusted Australian service and support. We only partner with official, authorized suppliers, ensuring every product you receive is genuine, covered by warranty, and ready to perform when it matters most.
Shipping
At Iron Outback Co., we are committed to providing reliable and timely delivery of your orders.
1–3 business days after payment has been confirmed.
Shipping times may vary depending on the delivery location and shipping method chosen at checkout.
Once your order is shipped, you will receive an email containing a tracking number and a link to track your parcel’s journey.
If you haven’t received tracking information within 5 business days of ordering, please reach out to us at: support@ironoutbackco.com.au
warranty & Return
All physical items are backed by applicable manufacturer warranties.
If no explicit warranty is mentioned, your product is still covered under Australian Consumer Law
Change-of-mind returns are not accepted unless otherwise noted on the product page.
To initiate a return, contact:
support@ironoutbackco.com.au within 7 days of receiving your order.
Choose options