BEAST BAR Bumper Replacement Bull bar Suitable For Toyota Hilux N80 2018-2020

The BOSSCO BEAST BAR lives up to it's namesake by adding unmatched aggression to the car. The BEAST loops accentuates the hard lines of the Hilux headlights and makes your car stand out from the rest of the crowd. Befitting for an absolute beast...

• Heavy duty steel construction 3mm thick bullbar construction
• Winch compatible | Winch ready 5mm thick winch cradle with 3mm bracing. Mounts directly to the front of the chassis, allowing winches to be mounted upright and directly to the chassis as opposed to the back of the bullbar. This is the preferred design of modern bullbars for safety and winch capability as the force is pulling directly on the chassis instead of the bullbar. Winch cradle comes with further support brackets for maximal strength
  • Built specifically for BA winches (SKU: 275877 or 275878). Square cutout on the top of the bullbar allows easy access to the winch control box. Bullbar also comes with a blanking plate if this winch is not used.
  • Licence plate flip-up bracket included
• White LED parkers included
• Compatible with Stediâ„¢ LED Foglights with DRL Upgrade (LEDCONV-FOG-ARB-1) White LED Cat's Eye Foglights included in package - built for heavy duty performance and light spread
  • Since the Stedi LED Foglight with DRL Upgrade are slightly larger than the Cat's Eye Foglights, the foglight cutout in the bar is made to suit these perfectly. With the Cat's Eye Foglights, there will be a slight gap around the foglight as seen in the images.
• Plenty of light & antenna mounting options pre-built into the Beast Bullbar are:
  • 2x round spotlights mounted to the bar under the middle loop - suits most 9" lights
  • 2x single light or antenna mounting tabs welded to the side loops (1 on driver and 1 on passenger) of the bullbar. Can be used for dual antenna setups, single antennas or smaller side lights to illuminate the sides of the track as well as in front for a full flood effect
• Black heavy duty powder coated finish.
• All fittings provided winch bracket, all high-tensile nuts and bolts and 3 front bash plates
• Laser cut 'Bossco4x4' logos in bar and centre bash plate
• Lower grille support bracket provided unlike some other bullbars which rely on cable ties
• You will need to cut the inner wheel arch
• Designed to work with factory fitted airbags
• Not ADR approved. For offroad use only. Please contact us if you'd like to be redirected to ADR approved options
• Free pickup available at our Prestons, NSW 2170 address

Stediâ„¢ LED Foglights with DRL Upgrade (LEDCONV-FOG-ARB-1)

LED & DRL UPGRADE
Stock is boring, which is why we created a beautifully engineered & designed LED Fog Light upgrade with integrated Day-Time Running Light (DRL). This is the one you've been waiting for. The perfect upgrade to our Bossco Beast Bullbars.

ENGINEERED FOR PUNISHMENT
We know that you're tired of removing your bash-plate to service burnt out halogen bulbs or replacing broken fog lamps. Replacing bulbs is a thing of the past thanks to Solid State LEDs which we guarantee for 30,000 hours. No more broken lenses thanks to the automotive grade poly-carbonate lens.

KEY TECHNICAL DETAILS

• UV Stable automotive grade Poly-carb primary Lens | Unlike the OE ours lens wont break!
• Environmentally sealed automotive connectors
• Military Spec Pressure Equalisation Vent | Eliminates condensation
• IP67 Ingress Protection | Protected from immersion between 15 centimeters and 1 meter in depth for 10min at a time.
• 50,000 hours Lifespan
• 24 month Warranty
• 5700K to ensure a CCT match to other STEDI LED products
• Price quoted is for a pair

Once installed we recommend that the beam is adjusted to ensure that it cuts off no higher than 50cm from the ground, with the car 25m away from a wall.

At Iron Outback Co., we deliver high-performance equipment backed by trusted Australian service and support. We only partner with official, authorized suppliers, ensuring every product you receive is genuine, covered by warranty, and ready to perform when it matters most.

At Iron Outback Co., we are committed to providing reliable and timely delivery of your orders.

1–3 business days after payment has been confirmed.

Shipping times may vary depending on the delivery location and shipping method chosen at checkout.

Once your order is shipped, you will receive an email containing a tracking number and a link to track your parcel’s journey.
If you haven’t received tracking information within 5 business days of ordering, please reach out to us at: support@ironoutbackco.com.au

All physical items are backed by applicable manufacturer warranties.
If no explicit warranty is mentioned, your product is still covered under Australian Consumer Law

Change-of-mind returns are not accepted unless otherwise noted on the product page.

To initiate a return, contact:
support@ironoutbackco.com.au within 7 days of receiving your order.