{"product_id":"1400mm-canopy-roof-rack","title":"1400mm Canopy Roof Rack","description":"\u003cp\u003eThe MM 1400mm Canopy Roof Rack is a low-profile platform rack built for rooftop tents, awnings, solar panels, recovery tracks, tie-down points, and general touring gear.\u003c\/p\u003e\n\u003cp\u003eDesigned for canopy setups where strength, clean fitment, and usable roof space matter, this rack provides a practical mounting platform without adding unnecessary height or bulk.\u003c\/p\u003e\n\u003cp\u003eBuilt from laser-cut aluminium side rails and black anodised aluminium extrusion, it is a clean and versatile option for touring, camping, work utes, and custom canopy setups. The extrusion design allows accessories to be mounted from multiple sides using slide-in nuts, bolts, brackets, and other compatible fasteners.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRack Length: 1400mm\u003c\/li\u003e\n\u003cli\u003eStandard Width: Approx. 1516mm overall\u003c\/li\u003e\n\u003cli\u003eCustom Widths: Available on request\u003c\/li\u003e\n\u003cli\u003eOverall Height: Approx. 70mm\u003c\/li\u003e\n\u003cli\u003eCross Rails: 6 × black anodised aluminium extrusion\u003c\/li\u003e\n\u003cli\u003eSide Rails: Laser-cut 5mm aluminium\u003c\/li\u003e\n\u003cli\u003eMounting Legs: 4mm powder coated steel\u003c\/li\u003e\n\u003cli\u003eRooftop Tent Brackets: 3mm powder coated steel\u003c\/li\u003e\n\u003cli\u003eHardware: Stainless steel bolts, washers, and fasteners included where required\u003c\/li\u003e\n\u003cli\u003eFinish: Powder coated side rails and brackets with black anodised aluminium extrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Final dimensions may vary depending on selected width, mounting setup, bracket options, and custom requirements.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-cut aluminium side rails\u003c\/li\u003e\n\u003cli\u003e6 × black anodised aluminium extrusion cross rails\u003c\/li\u003e\n\u003cli\u003e4mm powder coated steel mounting legs\u003c\/li\u003e\n\u003cli\u003e4 × low-profile rooftop tent brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware where required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlloy unistrut is not included unless specified.\u003c\/p\u003e\n\u003ch2\u003eIncluded Rooftop Tent Brackets\u003c\/h2\u003e\n\u003cp\u003eThe rack includes a set of 4 low-profile rooftop tent mounting brackets designed to suit common rooftop tent base extrusion channels.\u003c\/p\u003e\n\u003cp\u003eThese brackets allow the tent to be mounted neatly to the aluminium extrusion rails while helping keep the overall setup low, tidy, and secure.\u003c\/p\u003e\n\u003ch2\u003eOptional Rear Support Brackets\u003c\/h2\u003e\n\u003cp\u003eOptional rear support brackets are available for 1m canopy setups where additional rear support is required.\u003c\/p\u003e\n\u003cp\u003eThese brackets were developed for this rack when fitted to a compact 1m canopy, helping support the rear and assist with load distribution when it extends further back over the canopy.\u003c\/p\u003e\n\u003cp\u003eNote: These brackets are designed around a 1m canopy setup and may not suit other canopy sizes or mounting layouts. If you are unsure, please contact us before ordering so we can confirm the best mounting option for your setup.\u003c\/p\u003e\n\u003ch2\u003eMounting Notes\u003c\/h2\u003e\n\u003cp\u003eMounting to unistrut is recommended, as it allows better adjustability, easier positioning, and improved load spread across the canopy structure.\u003c\/p\u003e\n\u003cp\u003eIf you require unistrut or a specific mounting kit, please contact us before ordering so we can discuss the best option for your canopy.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eAssembly, Installation \u0026amp; Fitment Notice\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis rack is supplied unassembled and will require assembly before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAssembly and installation should be completed by a competent person or qualified installer. All fasteners should be checked and tightened correctly before use, and re-checked after initial driving and regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eActual carrying capacity will depend on the canopy structure, mounting method, fasteners used, load placement, vehicle limits, installation quality, and how the load is distributed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFor rooftop tents or heavy loads, the rack must be mounted to a suitable canopy structure with the load evenly distributed across the rack and mounting points.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis rack is not supplied with a certified load rating. Always follow your vehicle and canopy manufacturer’s roof-load recommendations.\u003c\/span\u003e\u003c\/p\u003e","brand":"Iron Outback Co.","offers":[{"title":"Rack Only","offer_id":54083262251374,"sku":null,"price":1299.0,"currency_code":"AUD","in_stock":true},{"title":"Add 1m Rear Support Brackets","offer_id":54083262284142,"sku":null,"price":1499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0924\/9125\/2078\/files\/1400mm_Canopy_Roof_Rack_v1..png?v=1782293293","url":"https:\/\/ironoutbackco.com.au\/products\/1400mm-canopy-roof-rack","provider":"Iron Outback Co.","version":"1.0","type":"link"}